Tipper, tray or pantech: which truck body suits the work?

Compare truck body types by load, access and payload. See real Isuzu tray, tipper and pantech weights, restraint rules and what to put in the build brief.

11 min readUpdated 17 November 2026Reviewed by Jason Cugley

The short answer

Choose a tipper for loose material you need to discharge on site, a tray for pallets and long lengths loaded from the side, or a pantech for goods that need weather protection and lockable doors.

  1. 01

    Compare truck body types by how your load gets on and off, then check the finished truck’s carrying capacity.

  2. 02

    The body uses part of that capacity before you load anything.⁠[1]⁠[2]⁠[3]⁠[5]

Key takeaways

  1. Write down the load’s weight and dimensions before choosing a cab chassis.

  2. Confirm how you will unload at the destination, including sites without a forklift.

  3. Compare finished vehicle weights with the same driver and fuel assumptions.

  4. Ask for a restraint arrangement suited to your actual load, including the strength of the body and attachment points.⁠[6]⁠[7]

  5. Make a finished weighbridge record and an approved body drawing part of the purchase brief.

Choose the body before the cab chassis

It’s Saturday in the dealer’s yard and the salesman points to a cab chassis ready to go. Before you discuss the price, settle what is going on the back. On the current Isuzu NLR used below, the factory tipper weighs 425 kg more than the factory tray, leaving 425 kg less for the load.⁠[2]⁠[3]

A cab chassis is the cab and running vehicle supplied for a load body to be fitted. Its price tells you nothing about the finished truck’s carrying capacity.

Start with the job you repeat. A forklift at the supplier doesn’t help you unload in a customer’s driveway. Put the delivery access and heaviest normal load in the brief before selecting a wheelbase.

Truck body types matched to the load

BodyWork it suitsLoading and unloadingMain compromise
TipperLoose soil, gravel and green waste.Load from above, discharge by raising the body.Hoist and body consume payload; tipping needs a suitable place.
TrayPallets, timber, steel and mixed building supplies.Forklift from the side or crane from above.Exposed freight needs its own restraint and weather protection.
PantechParcels, furniture and dry freight.Rear doors at a dock, or a tail lift where fitted.Walls restrict access; the box and any lift consume payload.

Loose material that has to come off fast

A tipper is a body that raises to discharge its load. It earns its place when shovelling the load off is the alternative. Specify the material and how it will leave the body, including the tailgate arrangement.

Check the intended tipping area before ordering. The raised body needs room, and the site must suit the truck’s operating instructions.

Close relative: a tipper with a tarp adds a cover to help contain material that could escape in transit; the tarp doesn’t replace the body’s containment function.⁠[7]

Pallets and long lengths loaded by forklift

A tray is an open load platform. Side access lets a forklift place freight where it needs to sit, and the open top suits crane loading.

Specify the longest load and show where it will sit. Mark forklift access and restraint points. Ask the builder to check the axle loads before you agree to the drawing.

Close relative: a drop-side tray has sides that fold down or detach for access; Isuzu’s Traypack uses removable sides and tailgate.⁠[2]

Goods that must stay dry and locked

A pantech is an enclosed box body with solid walls and a roof. It suits freight that needs protection from weather and a lockable load space. The example Vanpack has rear barn doors and internal tie-down rails.⁠[5]

Walk through a delivery before adding a tail lift. A tail lift is a powered platform that moves goods between the ground and the truck floor. Specify the loaded pallet and handling equipment together, then check the lift’s rating at that load position with its maker.

Close relative: a curtain-sider is a roofed body with flexible sides that open for access. Unrated curtains provide weather protection; load-rated curtains provide specified sideways restraint and still need forward and rearward restraint.⁠[7]

Tipper, tray and pantech loading methods Three trucks side by side. The tipper discharges loose material, the tray provides forklift side access, and the pantech provides rear access with an optional tail lift. Drawings are schematic, not model dimensions. HOW THE LOAD GETS ON AND OFF TIPPER TRAY PANTECH Loose loads Top loading Tips it off Pallets / steel Side forklift Crane loading Dry freight Rear loading Optional lift Choose the loading method before the chassis.
Fig. 1Side access, rear access and tipping give each body a different loading job.

What each body leaves for the load

Gross vehicle mass, or GVM, is the maximum loaded vehicle mass specified by the registration authority or, otherwise, the manufacturer.⁠[9] Tare is the unladen vehicle mass on the stated measurement basis. Isuzu’s nominal figures below already include 10 litres of fuel and 10 litres of AdBlue, with a tolerance of plus or minus 3%.⁠[1]⁠[2]⁠[3]⁠[4]⁠[5]

Payload is the carrying capacity left after the vehicle’s own mass. The comparison also deducts the driver and extra fuel. Work gear comes out before freight.

Worked example

Example: a paving contractor delivering loose gravel

This is an illustrative business and job, not a customer account. Assume you need to deliver 1,200 kg of loose gravel and tip it beside a driveway. The site is assumed suitable for tipping.

Compare the current Isuzu NLR 45-150 DT D25 Traypack and Tipper. Both have a 4,500 kg GVM and the matching cab chassis has a nominal tare of 2,236 kg.⁠[1]⁠[2]⁠[3] The pantech comparison is the NNR 45-150 DT D34 Vanpack, also at 4,500 kg GVM, on a different, longer chassis weighing 2,480 kg.⁠[4]⁠[5]

The table subtracts each matching bare chassis from its published finished vehicle mass. Those differences represent the factory body package and associated fitted equipment, not a separately weighed body. The Vanpack provides for a tail lift; one is not included in this comparison.⁠[5]

BodyBare chassisBody package, derivedFinished tareAvailable payload
Tray⁠[1]⁠[2]2,236 kg260 kg2,496 kg1,854 kg
Tipper⁠[1]⁠[3]2,236 kg685 kg2,921 kg1,429 kg
Pantech⁠[4]⁠[5]2,480 kg1,020 kg3,500 kg850 kg

Use these assumptions for every row:

  • The driver weighs 100 kg.
  • Extra fuel weighs 50 kg, above the fuel already included in tare.
  • AdBlue stays at the published tare allowance; there is no passenger or extra fitted accessory.
  • Work gear weighs a further 40 kg, including the tipper’s cover and tools.

Body package = finished tare minus matching cab chassis tare.

  • Tray: 2,496 minus 2,236 = 260 kg
  • Tipper: 2,921 minus 2,236 = 685 kg
  • Pantech: 3,500 minus 2,480 = 1,020 kg

Available payload = GVM minus finished tare, driver and extra fuel.

  • Tray: 4,500 minus 2,496, 100 and 50 = 1,854 kg
  • Tipper: 4,500 minus 2,921, 100 and 50 = 1,429 kg
  • Pantech: 4,500 minus 3,500, 100 and 50 = 850 kg

Freight allowance = available payload minus work gear.

  • Tray: 1,854 minus 40 = 1,814 kg
  • Tipper: 1,429 minus 40 = 1,389 kg
  • Pantech: 850 minus 40 = 810 kg

Tipper on this job = tare + driver + extra fuel + gear + gravel = 2,921 + 100 + 50 + 40 + 1,200 = 4,311 kg. The nominal margin under GVM is 4,500 minus 4,311 = 189 kg.

Choose the tipper for this job, subject to the finished weight and axle check. The tray offers more carrying allowance, but loses the tipping function. The pantech cannot carry the assumed gravel and gear within this calculation, and its enclosed body doesn’t suit the unloading task.

The 189 kg margin uses nominal weights. Obtain finished axle weights with the driver, operating fluids and equipment accounted for, then check the proposed loaded axle distribution.

How each completed truck uses its GVM Each bar totals 4,500 kg. Tipper: chassis 2,236, body package 685, driver and extra fuel 150, remaining load 1,429 kg. Tray: chassis 2,236, body package 260, driver and extra fuel 150, remaining load 1,854 kg. Pantech: chassis 2,480, body package 1,020, driver and extra fuel 150, remaining load 850 kg. Pantech uses the longer NNR chassis and excludes a tail lift. Each body value is derived from published finished and bare chassis masses. WHAT REMAINS AT 4,500 KG Published masses + driver and fuel assumptions GVM 1,429 kg left 2,236 chassis TIPPER NLR D25 Body 685 kg 1,854 kg left 2,236 chassis TRAY NLR D25 Body 260 kg 850 kg left 2,480 chassis PANTECH NNR D34 Body 1,020 kg Chassis Body 150 kg Load 150 kg = driver 100 + extra fuel 50. Load includes work gear. Pantech: longer chassis.
Fig. 2The same GVM leaves different load allowances after the fitted body and operating assumptions.

Restrain the load in every direction

The load must remain safely carried through braking and cornering. The body can form part of the restraint system, but closing the doors doesn’t establish that it can withstand the load’s forces.⁠[6]⁠[7]

As checked on 17 November 2026, the NTC light vehicle guide gives the restraint demands as 80% of load weight forwards, 50% sideways and rearwards, and 20% upwards where applicable.⁠[6] The heavy vehicle regulation specifies 0.8g forward deceleration, 0.5g rearward deceleration and 0.5g lateral acceleration, considered separately. Its 0.2g vertical requirement applies if friction or limited vertical displacement is relied on for the horizontal requirements.⁠[10]

These are performance requirements for the complete restraint system. They aren’t instructions to select straps by adding the figures printed on their labels. Strap angle and tension matter, as does friction between the load and deck.⁠[6]

On a tray, ask for suitable attachment points and a loading plan for your freight. A headboard is the structure behind the cab; its restraint strength needs to suit the load, not merely its appearance. In a pantech, check the walls and internal rails before relying on them.⁠[7]

For the example gravel job, the tipper’s sides and tailgate provide containment. Specify a suitable secured cover as part of the arrangement. Transport Victoria says an improperly restrained load that could fall is an offence, and recommends checking restraints during the trip.⁠[8]

Responsibility extends beyond the driver

For heavy vehicles, the Heavy Vehicle National Law gives each chain of responsibility party a duty to make its transport activities safe, so far as reasonably practicable. The driver, or someone permitting the vehicle to be driven, also has loading obligations under section 111.⁠[9] Contracting out the trip doesn’t remove a business’s own duties.⁠[15]

If you operate and load the truck yourself, deal with both jobs in the procedure. For the example, agree how the supplier will establish the gravel’s mass before loading.

Check dimensions and the heavy vehicle threshold

These limits were checked on 17 November 2026. For an ordinary rigid truck and its load, use the following general envelope; special vehicle categories and authorised exemptions have separate conditions.⁠[10]⁠[11]⁠[12]

MeasureGeneral limitWhat to check on the drawing
Width2.5 metres.⁠[11]The body and load, using the prescribed measurement exclusions.
Height4.3 metres.⁠[10]Overall travel height from the road, including the load.
Length12.5 metres.⁠[10]The complete rigid vehicle and load, not body length alone.

Qualifying Safer Freight Vehicles may be 2.55 metres wide, subject to the required safety features. Don’t assume a proposed wider body qualifies.⁠[11] Victoria also identifies 2.5 metres width, 4.3 metres height and 12.5 metres rigid length as the ordinary light vehicle dimensions before oversize arrangements apply.⁠[12]

A truck becomes a heavy vehicle under the HVNL when its GVM exceeds 4.5 tonnes. Exactly 4.5 tonnes remains on the light vehicle side; an empty heavier-rated truck doesn’t become a light vehicle.⁠[9]⁠[12] Check the licence implications in our GVM, payload and truck licence classes guide.

For long material, check overhang separately. Transport Victoria gives a truck’s rear limit as 60% of wheelbase or 3.7 metres, whichever is shorter.⁠[13] A legal overall length doesn’t settle that measurement. Have the builder mark both on the proposed loading drawing.

General Mass Limits still apply above the threshold

General Mass Limits, or GML, are statutory limits covering vehicle mass and axle groups. In 2026 the general mass limit for a tandem drive axle group rose from 16.5 to 17.0 tonnes.⁠[10]⁠[14] A lower manufacturer’s GVM or component rating still governs.⁠[10]

Check the actual axle arrangement against both sets of limits. Spare capacity on one axle cannot excuse overloading another. The example NLR remains limited to its 4,500 kg GVM.⁠[1]⁠[10]

Get the build agreed in writing

You can buy a manufacturer’s completed package or commission a body builder to fit a body to the chassis. Either way, ask who is responsible for the finished configuration. Send every quoting dealer and builder the same written brief.

Include these items before agreeing to the build:

  • The material or goods, their loaded dimensions and heaviest normal mass.
  • The loading method at each end, with forklift access or tail lift requirements.
  • A dimensioned drawing showing the body, axle positions and intended load placement.
  • The restraint arrangement, with the ratings you will rely on.
  • The estimated finished tare, accessory list and the fuel basis used.
  • A booked build slot, responsibility for any required certification and a finished weighbridge record showing each axle.

Think about the truck’s next job

Ask what another operator could carry with the finished body and payload. Don’t assume that a more versatile body earns a resale premium.

A tray gives a later owner an open platform. A pantech’s next load still needs to fit through its doors, while a tipper’s next operator needs the hoist. Keep the drawing and weight records with the truck.

For the paving example, keep the tipping function you need now. If truck work is occasional and the ute handles your normal load safely, compare keeping it and having material delivered.

Put the job into the brief

  1. Record the heaviest normal load and its dimensions. For the example, start with the assumed 1,200 kg gravel delivery, then confirm that weight with the supplier.
  2. Write down how the load gets on and off. Check the destination before selecting the body or adding equipment.
  3. Compare completed configurations, using the same operating assumptions. Review the proposed body drawing against your site access and how we source vehicles.
  4. Use EVRON’s See the brief we’d send to turn the job into a written specification. Have every dealer and body builder quote against that brief, with finished mass and responsibility for the completed build recorded.

Questions people ask

What is a pantech truck?

A pantech truck carries an enclosed, rigid box body for goods that need weather protection and lockable storage. Rear doors are the usual access point; confirm the actual door opening and restraint equipment before ordering. Isuzu’s example Vanpack has rear barn doors and internal rails.⁠[5]

What is the difference between a tray and a tipper?

A tray provides an open platform; a tipper raises its body to discharge material. Choose the tipper if loose material needs to come off at the delivery site. Choose a tray when side access for pallets or long bundles does the job.

Can I drive a pantech on a car licence?

Yes, in Victoria a car licence covers a pantech with a GVM no greater than 4.5 tonnes, subject to your licence conditions.⁠[16] The example Vanpack is rated at 4,500 kg.⁠[5] Check the registered rating and our GVM and licence guide, rather than relying on the body name.

How many pallets fit in a pantech?

Pallet capacity depends on usable floor dimensions, door clearance and pallet size. Weight can limit the load before floor space does. Ask for a drawing using your actual loaded pallets, then check their combined mass against the finished truck’s allowance.

Does a pantech come with a tail lift?

A tail lift is specification dependent, so check the quote. The Isuzu Vanpack sheet used here lists provision for a rear loader, rather than an included tail lift.⁠[5] Add the selected lift’s installed mass before recalculating what the truck can carry.

Do tipper loads have to be covered?

Cover a tipper load where that is needed to prevent material escaping. The restraint arrangement must suit the material; a tarp alone is not an adequate restraint for most loads.⁠[6] Victoria requires proper restraint even before anything falls from the vehicle.⁠[8]

Run your own numbers

See the brief we’d send

Pick the vehicle: rigid truck, tipper, prime mover, van, car or SUV. The drawing and the brief change to match.

Open the tool

Sources

  1. 01
    NLR 45-150 Specification Guide 2508_R2, weight table and note 6

    Isuzu Australia. Accessed 17 November 2026. Back

  2. 02
  3. 03
  4. 04
    NNR 45-150 Specification Guide 2601_R6, weight table and note 6

    Isuzu Australia. Accessed 17 November 2026. Back

  5. 05
  6. 06
    Load Restraint Guide for Light Vehicles 2018, updated design 2024

    National Transport Commission. Accessed 17 November 2026. Back

  7. 07
    Load Restraint Guide 2025, contained loads, side curtains and specialised bodies

    National Heavy Vehicle Regulator. Accessed 17 November 2026. Back

  8. 08
    Securing loads

    Transport Victoria. Accessed 17 November 2026. Back

  9. 09
    Heavy Vehicle National Law, sections 5, 6, 26C and 111

    Queensland Government. Accessed 17 November 2026. Back

  10. 10
  11. 11
    Vehicle Standards Guide 36, Vehicle Width

    National Heavy Vehicle Regulator. Accessed 17 November 2026. Back

  12. 12
    Class O oversize light vehicle restrictions

    Transport Victoria. Accessed 17 November 2026. Back

  13. 13
    Overhang limits on trucks, cars, and trailers

    Transport Victoria. Accessed 17 November 2026. Back

  14. 14
    Changes to Mass and Dimension Requirements, August 2026 fact sheet

    National Heavy Vehicle Regulator. Accessed 17 November 2026. Back

  15. 15
    Master Code of Practice 2026, primary duty and shared responsibility

    National Heavy Vehicle Regulator. Accessed 17 November 2026. Back

  16. 16
    Licence categories

    Transport Victoria. Accessed 17 November 2026. Back

The information here is general. It doesn’t take your objectives, finances or needs into account, and it isn’t financial, legal or tax advice. Talk to us, and to your accountant, before you make a decision.

Got a question we haven’t answered?

Ask us a question

We’ll get back to you within 24 hours.